Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

Silicon leveling agnet
Polyether modified silicon leveling agent
Polyester modified silicon leveling agent
Reactive silicon leveling agent
Anti-graffiti silicon leveling agent
Touch silicon leveling agent
Other
Silicon free leveling agent
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Substrate wetting agent
Dispersing agent
Defoamer
Silicon defoamer
Silicon-free defoamer
Adhesion additive
anti-graffiti and easy-cleaning additive
Other
Waterborne resins and emulsions
Silion defoamer
JIAZHI(R)Resin
JIAZHI(R) Anti-icing hydrophobic resin
JIAZHI(R) Anti-graffiti resin
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI(R)JZ-9540

Model number
JIAZHI®JZ-9540

Specification
Composition   Silicone modified hydroxyl acrylic resin solution
Appearance   Transparent to slight yellowish clear liquid
Solvent   BAC/PMA
Content   50±3%(105℃ 3h)
Density   0.98-1.02g/ml(25±1)℃
Viscosity   100-1000mPa·s(Rotating viscometer)(25±0.2)℃
Hydroxyl value   120±5 mg KOH/g(Theoretical value of solid resin)
Note: This datasheet is intended to give typical results, not standard.Subject to COA.

Application system
Solvent-based
Properties
Increase slip. Improve hydrophobicity and oleophobicity.
Provide anti-marker wiping performance.
Provide lotus.
Compared with anti-graffiti additive, better anti-graffiti effect and alcohol-resistant wiping performance.
Water contact angle>100°
Recommended formula
1. Suggestion for PU varnish formulation

 

Material

Dosage%

Part A

JZ-9540

76.0

PMA

22.4

Dryer(1%)

1.0

WE-D8920BR(leveling agent)

0.5

WE-D980(defoamer)

0.1

Part B

N3390

18.0

Note:
1.N3390 is a cure agent from Bayer with a value of NCO%=19.6%.
2.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
3.Suggest dry it at 80℃ for 1h or 150℃ for 5min.
2. Suggestion for baking system formulation

Material

Dosage

JZ-9540

50.0

Butylated amino resin

10.0

Solvent

38.5

Adhesion promoter

1.0

Acid catalyst

0.5

Total

100

Note:
1.The resin could be adjusted according to circumstance.
2.Suggest drying temperature at 150℃ for 30min or 210℃ for 90s.

Storage stability
Keep intact 36 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.

package
25KG / 180KG

Go
Top

友情链接:    凤凰彩票   01彩票   德国飞艇手机客户端   688彩票官网   大乐购彩票代理